Location
Horní Bečva - Přehrada; na pláži
Nearest city, village
(2.6 km) Horní Bečva - Vsetín - Czech Republic
Description
Charging station for electric bicycles and electric scooters. Type of charging station and available sockets can be found in the detailed description of each station.
Charging station for electric bikes on the map
Classic European 230V socket (Schuko) used in the European Union. Please remember that you will also need your charger with the appropriate cables to charge your e-bike. It will not be possible to charge your e-bike without this accessory.
USB connector, or several different types of USB connectors intended especially for charging mobile phones, action cameras, power banks, and other devices with a charging voltage of 5 V and small charging currents. The usual maximum value of the charging current here ranges from 0.5 A to 2.0 A. The most common type of connector used in charging stations is the USB 2.0 type.
A set of tools designed to repair a bicycle. A few of the most commonly used hex metric or inch socket wrenches are usually available here. In addition, you will often find a flat and Phillips screwdriver in the set, or even some basic spanners. The necessary basic equipment for repairing the tire or tube of your e-bike should not be missing here.
A compressor or hand pump to add pressure to the tires of your e-bike. You put the end of the hose of the compressor or the hand pump on the valve of the tire before starting it. You then start the compressor according to the instructions on the charging station, or usually using the corresponding button. Use the hand pump as usual.
The charging station has wireless charging for mobile phones. Before charging, place your phone in the designated location and follow the instructions on the charging station. Charging should start automatically after placing the mobile phone in the designated place, or by pressing the appropriate button.
