Na Městečku 50, Slavětín; před úřadem městyse

(0.0 km) Slavětín - Louny - Czech Republic

--

Charging station for electric bicycles and electric scooters. Type of charging station and available sockets can be found in the detailed description of each station.

Classic European 230V socket (Schuko) used in the European Union. Please remember that you will also need your charger with the appropriate cables to charge your e-bike. It will not be possible to charge your e-bike without this accessory.

USB connector, or several different types of USB connectors intended especially for charging mobile phones, action cameras, power banks, and other devices with a charging voltage of 5 V and small charging currents. The usual maximum value of the charging current here ranges from 0.5 A to 2.0 A. The most common type of connector used in charging stations is the USB 2.0 type.

Special connector designed exclusively for charging Bosch Smart system batteries. The charging cable terminated with this connector is usually a fixed part of the charging station, or this cable is removable and stored in a lockable box near the charging station. In the case of a detachable cable, it is of course possible to bring your own cable to use to charge the e-bike.

Special connector designed exclusively for charging Bosch Standard system batteries. The charging cable terminated with this connector is usually a fixed part of the charging station, or this cable is removable and stored in a lockable box near the charging station. In the case of a detachable cable, it is of course possible to bring your own cable to use to charge the e-bike.

Universal connector, sometimes also referred to as the Bafang connector, is intended especially for charging the batteries of the Bafang system, or charging the batteries of non-branded e-bikes. This connector is most often of the Jack or XLR type. The charging cable terminated with this connector is usually a fixed part of the charging station, or this cable is removable and stored in a lockable box near the charging station. In the case of a detachable cable, it is of course possible to bring your own cable to use to charge the e-bike.

A compressor or hand pump to add pressure to the tires of your e-bike. You put the end of the hose of the compressor or the hand pump on the valve of the tire before starting it. You then start the compressor according to the instructions on the charging station, or usually using the corresponding button. Use the hand pump as usual.

It is possible to move away from the charging station during charging and leave your e-bike or mobile phone unattended for a short period of time, when you lock your mobile phone or charger to this lockable box,