Classic European 230V socket (Schuko) used in the European Union. Please remember that you will also need your charger with the appropriate cables to charge your e-bike. It will not be possible to charge your e-bike without this accessory.
Special connector designed exclusively for charging Shimano system batteries. The charging cable terminated with this connector is usually a fixed part of the charging station, or this cable is removable and stored in a lockable box near the charging station. In the case of a detachable cable, it is of course possible to bring your own cable to use to charge the e-bike.
Special connector designed exclusively for charging Bosch Standard system batteries. The charging cable terminated with this connector is usually a fixed part of the charging station, or this cable is removable and stored in a lockable box near the charging station. In the case of a detachable cable, it is of course possible to bring your own cable to use to charge the e-bike.
Universal connector, sometimes also referred to as the Bafang connector, is intended especially for charging the batteries of the Bafang system, or charging the batteries of non-branded e-bikes. This connector is most often of the Jack or XLR type. The charging cable terminated with this connector is usually a fixed part of the charging station, or this cable is removable and stored in a lockable box near the charging station. In the case of a detachable cable, it is of course possible to bring your own cable to use to charge the e-bike.
A set of tools designed to repair a bicycle. A few of the most commonly used hex metric or inch socket wrenches are usually available here. In addition, you will often find a flat and Phillips screwdriver in the set, or even some basic spanners. The necessary basic equipment for repairing the tire or tube of your e-bike should not be missing here.
A compressor or hand pump to add pressure to the tires of your e-bike. You put the end of the hose of the compressor or the hand pump on the valve of the tire before starting it. You then start the compressor according to the instructions on the charging station, or usually using the corresponding button. Use the hand pump as usual.
